Customer is the key person in determining the final arrangement. BS 7671 (the Wiring Regulations) will often recommends that a project should be discussed with the client.
IEEE regulation will be strictly adhere to for designs. the software used in this blog is the AUTO-CAD software.
Note: The lumen method of lighting calculation is used for this project.
After calculating the number of light fitting in each room. its was then placed appropriately in each of the rooms.
SIMPLE RULES TO FOLLOW WHEN PLACING THE LIGHTS1. Lights should be placed at positions where it will be evenly distributed.
2. The distance of a light fitting from the wall should be approximately halve the distance between two light fittings